What is GPR concrete scanning and why do I need it?

GPR (Ground Penetrating Radar) concrete scanning uses electromagnetic pulses to map the internal structure of concrete — locating rebar, post-tension cables, conduits, and voids — before any cutting or drilling. It is essential to avoid striking post-tension cables (which can cause catastrophic structural failure and injury), hitting electrical conduits, or damaging other embedded services. Delco Industries provides GPR scanning across Gold Coast and Brisbane with ±5mm accuracy and same-day reporting.

How much does concrete scanning cost in Queensland?

GPR concrete scanning in Queensland typically costs $350–$600 for a standard residential scan, $600–$2,500 for commercial projects, and $2,500–$15,000+ for large infrastructure projects. Pile integrity testing costs $80–$120 per pile for standard residential, $65–$95 per pile for bulk commercial projects. All Delco Industries quotes are free, no-obligation, and include engineer-certified reports. Call 0455 333 374 or visit delcoindustries.com.au/pricing for a full guide.

What is pile integrity testing (PIT)?

Pile Integrity Testing (PIT) is a non-destructive test that uses low-strain impact echo technology to evaluate the structural soundness of foundation piles. A small impulse is applied to the pile head, and the reflected wave signature reveals defects such as necking, cracking, bulging, or voids. Delco Industries performs AS 2159-compliant pile integrity testing across Gold Coast, Brisbane, and Queensland, testing 20+ piles per day with engineer-certified reports delivered within 48 hours.

Do I need to scan concrete before drilling or cutting?

Yes — scanning before any concrete drilling or cutting is critical and legally required under safe work practices. Post-tension cables are under immense pressure (typically 150–200 tonnes) and if severed can cause explosions, serious injury, and structural collapse. Electrical conduits in concrete can cause electrocution. GPR scanning by Delco Industries takes as little as 30–60 minutes for most residential jobs and eliminates all these risks before work begins.

Where does Delco Industries operate?

Delco Industries is based on the Gold Coast and operates across all of South East Queensland including Gold Coast, Brisbane, Logan, Ipswich, Sunshine Coast, and Toowoomba. We also service regional Queensland (Townsville, Cairns, Rockhampton, Gladstone) and deploy nationally to Sydney, Melbourne, Perth, Adelaide, Darwin, and Canberra for major infrastructure projects. Call 0455 333 374 for same-week availability.

What standards does Delco Industries comply with?

Delco Industries operates to Australian Standards including AS 2159 (Pile Testing), AS 3600 (Concrete Structures), AS/NZS 1170.1 (Structural Design Loads), AS 1012.14 (Core Testing), and ASTM C1383 (Impact Echo Testing). All reports are engineer-certified and accepted by structural engineering firms, insurance companies, and government bodies across Australia.

How quickly can Delco Industries attend my site?

Delco Industries offers same-week site visits across Gold Coast and Brisbane for most projects. Urgent callouts are also available. For large infrastructure projects or interstate deployments, lead times of 3–7 days apply. Free no-obligation quotes are provided within 2 hours of inquiry. Call 0455 333 374 or submit an online quote request.

What is concrete cancer and how is it assessed?

Concrete cancer (also known as concrete spalling) occurs when embedded steel reinforcement corrodes, expanding and cracking the surrounding concrete. Delco Industries performs comprehensive concrete cancer assessments using visual inspection, cover meter surveys, half-cell potential testing, carbonation depth measurement, and chloride content testing. We deliver detailed reports with remediation strategies and cost estimates — essential for strata buildings, balconies, car parks, and coastal structures in Queensland.

How much does GPR concrete scanning cost in Queensland?

GPR concrete scanning costs $350–$850 for residential scans and $500–$2,500+ for larger commercial projects in Gold Coast and Brisbane.

How much does pile integrity testing cost in Queensland?

Pile integrity testing costs $85–$150 per pile with minimum project costs around $800–$1,200.

How much does NDT structural analysis cost?

NDT testing starts from $450 for basic surveys. Full multi-method structural analysis ranges $1,500–$8,000+ depending on scope.

Do prices include GST?

All prices quoted by Delco Industries are exclusive of GST unless otherwise stated. GST (10%) will be added to all invoices.

Are there minimum project charges?

Yes — most services have minimum project charges reflecting travel, setup, and reporting time. Minimums are typically $350–$800 depending on the service. Combined services on the same site often reduce the effective per-service cost significantly.

Can I get a discount for multiple services?

Yes — when multiple services are performed on the same site visit (e.g., GPR scanning + core drilling, or pile testing + NDT analysis), we apply multi-service discounts. Contact us to discuss your project requirements.

How do I get an accurate quote?

Contact us via our quote form or call 0455 333 374. Provide the service type, site location, approximate scope (area, number of elements/piles, number of holes), and any report requirements. We'll respond with a detailed, itemised quote within 24 hours.

2025 Price Guide

How Much Does Concrete
Scanning Cost in QLD?

Transparent indicative pricing for GPR concrete scanning, pile integrity testing, NDT analysis, core drilling, and all Delco Industries services across Gold Coast and Brisbane.

All prices are indicative ranges. Free detailed quotes provided for every project.

All prices are indicative ranges only based on typical Gold Coast and Brisbane projects. Actual costs depend on scope, access, complexity, and report requirements. Free, detailed written quotes are provided for every project before any work commences.

Service Pricing

GPR Concrete Scanning

$350 – $2,500+per project

Typical: $600–$900 for standard commercial

Minimum Cost

~$350 (single residential location)

"GPR scanning is the #1 cost-saving investment before any drilling or cutting work."

What's Included

On-site scanning

Safe zone marking on slab

Detailed data engineered report

CAD-compatible data on request

Pricing Factors

Number of scan locations

Site area (m²)

Report complexity

Access & travel

Get an Accurate Quote for Your Project

All quotes are free, detailed, and provided within 24 hours. No guesswork — we scope your project properly before providing a price.

FAQ

Pricing FAQs

All prices on this page are indicative ranges based on typical projects across Gold Coast and Brisbane. Every project is unique — pricing depends on access, scope, urgency, and report requirements. We provide free, detailed written quotes for every project before any work commences.

Free Quotes · Fast Turnaround · Certified Results

Need Concrete Scanning
in Gold Coast or Brisbane?

Don't drill or cut blind. Our GPR scanning, NDT testing and structural assessment services protect your project, your team, and your budget. Available across South East Queensland — contact us today for a free, no-obligation quote.

Response within 24 hours · Same-week site visits available

How Much Does ConcreteScanning Cost in QLD?

GPR Concrete Scanning

Get an Accurate Quote for Your Project

Pricing FAQs

Need Concrete Scanningin Gold Coast or Brisbane?

How Much Does Concrete
Scanning Cost in QLD?

Need Concrete Scanning
in Gold Coast or Brisbane?